FAQ
-
what is hydraulic?
(Creating any kind of pressure using fluid (mostly oil There is a wide rage of using such as: press cylinder, breaching equipment and more.
-
What is breaching?
Breaching is penetrating into building,, territory or property
Breaching is usually done from the windows and doors, using a great force without considering the harm of the property.
Rarely the breaching is done threw the wall of the buildings.
We can divide breaching for two sub-categories:
Hot entry- using explosive
Cold entry- using mechanical instruments such as: door busters, bars and etc’.
-
What is cold entry and why it is better
Cold entry- using mechanical instruments such as: door busters, bars and etc’.
Unlike the hot entry, the security forces can use the cold entry in any scene. There is no danger of harming people, and it can be use in urban places.
Further more the whole process is controlled, which allow the user to stop at any point of the operation (in case of cancelling or just earning time to other forces and etc’.)
-
Equipment weight
All hydronoa’s systems were developed and designed as user friendly devices.
it grants the user maximum comfort in manners of weight and more then all simply operation.
The systems were developed for Special Forces and allow long distance carrying.
In order to make the mention above the system are tremendously light and small.
-
Does the equipment has enough power?
Although its small size the systems has a great power and the ability to perform under though conditions.
-
Advantage point
Thanks to its small size and the tremendous power it delivers, the systems can perform in places that other bigger and clumsier equipment has been failed.
-
How to maintain the equipment?
One of the uniqueness point of hydronoas equipment is that its require zero maintenance.
All you have to do is check that no oil missing, that the quick couplers are clean, and that there is no harm to the hose.
Remember-following the instructions will cause a long life period of the system.
-
Do the systems can perform with any hydraulic pump?
Hydronoa provides its costumer with complete set.
Therefore, hydronoa’s systems will be operated only with hydronoa’s pump or by those that approved by hydronoa.
-
When do we have to replace the hose?
In any case of harmed/damaged hose we have to replace the hose.
In case that the hose is OK, according the European regulation hoses must be replace in no more then 10 years.
-
How long is the warranty period?
The warranty of hydronoa’s systems is for one year, from the purchasing day. (in case of right use)
-
What kind of oil should be used?
Hydronoa’s systems are operated by hydraulic oil, delespin 15.
It can be used by its parallels.
-
When do we have to change the oil?
There is no need to change oil unless there is licking or that there is oil missing.
-
How to check oil level?
The oil level should reach 3-4 mmunder the highest line.
Furthermore in order to make sure that there is enough oil, operate the device to its final position and make sure that you can create pressure in its final position.
-
How to fill oil?
On top of the oil tank you will find the filling hole. Fill it about 3-4 mmunder the highest line.
-
Do the door busters can open left doors?
Yes, all hydronoa’s door busters can open right/left doors.
All you have to do is switch the cylinder.
All hydronoa systems are designed for left&right hand people!
-
Do the systems can perform under water?
Yes, it has to be adjusted by hydronoa for this purpose.
-
How to make sure the system is clean?
Since Hydronoa equipment is being used under though condition and on the field, therefore make sure, before the connection of the pump by its quick copluer to the device that both quick couplers are clean.
